УДК: 681.7.023.73

Grinding aspheric surfaces of optical workpieces with a full-size tool

Publication in Journal of Optical Technology

For Russian citation (Opticheskii Zhurnal):

Кукс В.Г. Шлифование асферических поверхностей оптических деталей полноразмерным инструментом // Оптический журнал. 2012. Т. 79. № 3. С. 43–46.

Kuks V. G. Grinding aspheric surfaces of optical workpieces with a full-size tool [in Russian] // Opticheskii Zhurnal. 2012. V. 79. № 3. P. 43–46.

For citation (Journal of Optical Technology):

V. G. Kuks, "Grinding aspheric surfaces of optical workpieces with a full-size tool," Journal of Optical Technology. 79(3), 157-159 (2012). https://doi.org/10.1364/JOT.79.000157

Abstract:

This article briefly describes the results of the development and use at NPO GIPO of a full-size tool with an aspheric working surface for grinding. Aspherization is carried out with free abrasive on domestically produced Planeta machines, developed in the 1970s–80s by specialists at NPO GIPO and the Minsk Mechanical Factory and fabricated in Smorgon’ (Belarus).

Keywords:

aspherization, asphericity, correction, full-size tool, precision, grinder

OCIS codes: 220.1250

References:

1. V. G. Kuks and A. G. Khusnutdinov, “Producing aspheric optical surfaces of rotation in a wide range of process parameters,” Opt. Zh. 74, No. 1, 36 (2007). [J. Opt. Technol. 74, 27 (2007)].
2. O. G. Karlin, V. G. Kuks, L. E. Lipovetski˘ı, L. V. Lukin, K. S. Mustafin, A. Z. Khabirov, and A. G. Khusnutdinov, Fabrication and Monitoring of Aspheric Optics (TsNII Informatsii, Moscow, 1980), pp. 21–40.
3. O. G. Karlin and V. G. Kuks, “Production of optical items with aspheric surfaces using an elastic tool,” Opt. Mekh. Prom. No. 12, 57 (1966).
4. V. G. Kuks, “Determining the optimum aspherization regimes on the Planeta machines,” Opt. Mekh. Prom. No. 2, 24 (1980). [Sov. J. Opt. Technol. 47, 87 (1980)].
5. F. W. Preston, “The theory and design of plate-glass polishing machines,” J. Soc. Glass Technol. No. 11, 214 (1927).