ITMO
ru/ ru

ISSN: 1023-5086

ru/

ISSN: 1023-5086

Scientific and technical

Opticheskii Zhurnal

A full-text English translation of the journal is published by Optica Publishing Group under the title “Journal of Optical Technology”

Article submission Подать статью
Больше информации Back

УДК: 621.785

Crystallization of metals under conditions of superfast cooling when materials are processed with ultrashort laser pulses

For Russian citation (Opticheskii Zhurnal):

Завестовская И.Н., Канавин А.П., Менькова Н.А. Кристаллизация металлов в условиях сверхбыстрого охлаждения при обработке материалов ультракороткими лазерными импульсами // Оптический журнал. 2008. Т. 75. № 6. С. 13–19.

 

Zavestovskaya I.N., Kanavin A.P., Menkova N.A. Crystallization of metals under conditions of superfast cooling when materials are processed with ultrashort laser pulses [in Russian] // Opticheskii Zhurnal. 2008. V. 75. № 6. P. 13–19.

For citation (Journal of Optical Technology):

I. N. Zavestovskaya, A. P. Kanavin, and N. A. Men’kova, "Crystallization of metals under conditions of superfast cooling when materials are processed with ultrashort laser pulses," Journal of Optical Technology. 75 (6), 353-358 (2008). https://doi.org/10.1364/JOT.75.000353

Abstract:

This paper presents a study of the process of superfast cooling from the melt, implemented when materials are being processed with ultrashort laser pulses. An analytical solution of the kinetic equation is found that describes the distribution function of the nucleation centers of the crystalline phase, depending on the number of atoms contained in them, on the assumption that a fairly large number of particles whose size exceeds a critical value exist at each specified instant of cooling, and that the nucleation centers are lamellar. Both conditions are satisfied in practice during rapid cooling from the melt. The mean size of the crystalline nucleation centers is computed, and the volume of the crystallized phase is determined. The critical cooling rate, at which the crystallization process is suppressed and an amorphous layer can be formed, is determined as a function of the parameters of the laser-operation regime and the thermodynamic characteristics of the material.

OCIS codes: 260.2160, 320.7130

References:
-